P/N: CBL-LINK-JSTtoCAN

Our updated LinkECU Plug In CAN PCB Expansion Cable, allows the user to connect the ECU to either the vehicle CAN bus or with separate CAN devices, or to add Serial communications to G4+/G4X Plugin ECU’s. Plugs directly into the PCB. We sell this convenient DTM cable option for easy connections to your CAN devices directly from the PCB.

This upgraded cable comes with a Deutsch DTM4 (for G4X) or DTM6 (for G4+) ECU’s.

Kit Includes 300mm / 12in CAN to PCB Connector.

PLEASE NOTE: If using the CAN Wideband you must substitute the +12VDC Power Wire from an external source as the ECU’s pins do not handle high current draw. If you’re only powering a Gauge or Display Dash, it should be enough. Also, sometimes we or LinkECU will be out of stock on these, but, we can build your our own version (see pics).