DOWNLOADS

Discontinued Haltech Legacy Product Info

Bellow you will find explanations and files that will help you keep using you older legacy Haltech ECU’s with a modern laptop.

** UPDATE JAN 13 2024 ** Moved files to a different folder, if you’re getting an error while trying to download please refresh the page.

DosBox v0.72 - You will need DosBox for the older DOS Based ECU’s like E6K/S/A, E6GM, and F10, F9, F7, F3.

** UPDATED SEP 25 2023 ** Installation Instructions for old DOS Based ECU’s CLICK HERE.

Other ECU’s - You can still download older DOS based ECU’s software, manuals and wiring diagrams directly from the Haltech Website’s Discontinued Products Section.

Haltech HalwinX Software for E6X/F10X ECU’s - This version of the software has been modified to run on 64bit machines.

HalwinX v1.26 Software (32bit)

** UPDATED SEP 25 2023 ** HalwinX Installation Instructions CLICK HERE!

Haltech Halwin Software for E8/E11v2 ECU’s - Modified for modern 64bit Win8/10/11 Machines.

Haltech Halwin Software for E8/E11v2 ECU’s - Full package of the software with the 32bit Setup.exe Installer already in there. You will need the Build 35 Firmware files bellow as well. A firmware udpate SHOULD be performed to make sure the ECU is properly setup and working normally, especially if it has been sitting for a long time, or is showing some issue.

Halwin E8/E11 Software v1.89 (32bit)

** UPDATED SEP 2023 ** Halwin Installation Instrucions CLICK HERE!

Build 35 Firmware Files - E8 & E11v2 - These are BIN files for each ECU. You MUST check the firmware in your ECU BEFORE trying to tune it, if your ECU’s firmware is NOT Build 35, if its a lower number, STOP! And immediately perform a firmware update. To check your ECU’s firmware go to Options/Firmware Version Info, and a window will show your ECU’s firmware.

Make sure to PLEASE DISCONNECT YOUR IGNITION COILS BEFORE you start performing the update!

Bellow you will find a Youtube Video showing the exact steps to take when performing a firmware update to these ECU’s. There is a very specific set of steps that you HAVE to do for it to be done correctly.

CLICK HERE for Firmware Update Procedure Video for E8/E11v2 ECU’s.